Company Products Download Contact
Home Products Wall Products

Wall Plastbau® 3 Description, Models and Benefits Advantages of the insulating
ETA for Wall Plastbau® 3
Wall Plastbau 3

Features of the formwork wall Plastbau® 3 materiales

It is an insulating disposable formwork destined to built vertical structures in concrete, consisting of two panels in high density foam polystyrene EPS150 (self-extinguishing), Class EUR E, connected together, at a variable distance, by a series of metal trellis. The metal trellis are made up with vertical uprights Ø8, Ø10 in B450C, fitted every 20 cm on the two internal sides of the formwork and connected with beams Ø5 and by a series of diagonals Ø3, used to make the formwork stiffer during the M casting.


The diagonals are opposed one to the other as to host, before casting, the inside horizontal bars forecast by the designer. The space between two EPS plates is filled with concrete, thus building self-standing vertical walls compliant with standards. It is thus possible to build civil and industrial works and multistorey buildings, in concrete, suitable insulated and finished. The formwork internal and external plates consist of foam polystyrene styrenics (EPS), EPS 150 grey, improved lambda ­ D = 0.031 W/mK manufactured according to the standard EN 13163 and to the EC standard as forecast by the Italian regulations on insulating materials. According to their final use, the grey plates are manufactured with a material whose mass volume accounts for p=27/30 kg/m3. EPS is compatible with concrete, cement, masonry, brickworks, mortar, plaster, bituminous waterproof membranes, etc. and therefore it can be used for different applications, paying simply attention, should it be opened to the outside, to protect it from UV rays.

Specific thermal capacity Cp=1450 J/(kg K)*
Water steam resistance factor μ = 60*.

Internal plates are always manufactured with the same thickness, 5 cm, 7,5 cm, 10 cm, while external plates, as specified on the table, can be 5, 7.5, 10, 12.5, 15, 20, 25 cm thick, as to provide for a better thermal insulation. Table values according to the regulation UNI EN ISO 10456

Construction details

The range of wall formwork Plastbau3 includes 59 sections, for a total of 118 tipi with a range for the raw brickwork varying from 22 to 45 cm. The PIastbau3 wall exhibits a variable geometry as to comply with the structural designer requirements, with 5 formwork sections, from cm 12 to cm 30 and a vertical metal reinforcement Ø8 (kg/m2 3,95) or Ø10(kg/m2 6, 17) B450C at will, transversally connected to n. 25 Ø 5 per m2 (minimum n. 9 per m2 from DM 08) already available in the formwork panel. The package reinforcement will be fitted within the building yarn with longitudinal horizontal bars, to be easily inserted within the specific spaces, every 20 cm, inside the formwork, a double metal mesh 20x20, transversally connected. The thermal-technical designer profiting only from the raw formwork, can selected among 17 different thermal transmittance versions, from U 0.27 to U O, 09 W/ m2K and yie value from 0,012 to 0,002.

Plastbau 3 - Wall
Corner reinforcement and horizontal section coupling Details of the lintez Floor kerb

Home Page Company Products Download Contact
© 2002 Poliespanso S.r.l. - All rights reserved - Zona Ind. Valdaro
Via Amerigo Vespucci 10, 46100 Mantova
Tel. +39.0376.343011 - Fax +39.0376.343020
P.IVA / Cod. Fisc 01417720206
Cap. Soc. 100.000.000 i.v.
Reg. Imp. MN 01417720206
R.E.A. 157372
Privacy and cookie policy

Certifications - Poliespanso
The information on this site may be subject to change without notice.
Any reproduction, even partial, of the contents is forbidden without prior consensus from Poliespanso srl. For more information see our Terms and Conditions and our notification regarding sensitive data processing.